Complete MTB gear cable set with all you need in one handy pack.
Fitting new gears or completely overhauling your gear cabling couldn't be easier - everything you need in one pack.
Includes 1.2 mm inner wires (1 x 2100 mm, 1 x 1800 mm) and black 4 mm SP41 outer casing for a complete bike (1 x 3000 mm), and sealed outer caps, one with added tongue, for rubber shield, plus inner end caps.
Stainless steel, precision ground, round inner wire, leaves a smooth surface, for low friction, while providing high corrosion resistance.
Outer casing is lubricated internally, along its length, with low friction silicone grease, to reduce cable friction.
Special construction process makes for an axially stiff outer casing, that transmits shifting movements accurately and quickly.
Outer casing is lined with a polymer sheath, to assist with the smooth operation of the inner wire.
Products & specifications shown on this website are believed to be correct, but are not guaranteed. No liability is implied or accepted. If in doubt, you are advised to confirm current specifications, before buying. At present, our stock control system is entirely manual. Whilst we endeavour to keep our records up to date, we are not infallable! Please do not rely 100% on us having an item in stock even if it says so on the website! IF YOU NEED A DEFINATE ANSWER, PLEASE CONTACT US (BUT PLEASE STATE HOW MANY OF AN ITEM YOU REQUIRE)!